Compact horizontal bending machines Euromac DIGIBEND 800
|Max. breaking force, kN||800|
|Max. travel, mm||345|
|Max. operating speed, mm/s||9,3|
|Min. working speed, mm/s||4,6|
|Reverse speed, mm/s||45|
|Working table dimensions WxLxH, mm||650 x 1565 x 925|
|Tool fixing holes||6×Ø80|
|Oil tank capacity||60|
|Motor power, kW||3,7|
|Bending with two jaws – max. diameter, mm||60|
|Swivel bending – max. diameter, mm||42|
|Maximal Y-coordinate rapid traverse, m/c2||30x10|
|Maximal punching capacity 40 kg/mm (steel)||150x10|
|Approximate mass, kg||700|
European quality of machine build and components provide high-precision performance and reliability:
- The monolithic frame made of Meehanite (700 N/mm²) alloy of high hardness ensures the long life of the machine when operating with high loads.
- The cylinder housing is integrated with the machine bed.
- The horizontal position of the hydraulic cylinder provides a direct transmission of force to the tool, avoiding control knobs.
- The option to reduce the operating force is meant to prevent the destruction of small tools or soft materials.
- All working surfaces have been hardened and ground.
- The work table is fitted with a wear-resistant surface.
The working table of universal design allows installing of various types of tooling to perform specific operations. Plus, the equipment necessary for this you can make on your own.
- A wide tabletop with 6 slots for tooling.
- Tools can be fastened quickly by means of the eccentric tool holder.
The CNC control system with intuitive programming in Russian (selection of another language is possible).
- The memory can store up to 55 sequences with 9 working positions in each.
- Search programs by given criteria.
- Bending parameters are shown on the display.
- The repeatability accuracy when positioning the puncheon ± 0.05 mm.
Bending: tubes, bars and strips at an angle up to 180°; max. diameter - 50 mm; max. cross section 12x100
Horizontal bending press Digibend. Depending on the selected sets:
- Manual or automatic back gauge according to the selected set.
- Pedal for remote control.
- A set of keys.
- Operating manual in Russian.
- The full oil charge.
Device for punching holes Digibend 400 и 800, H=100 mm, punches and dies type GEKA, ø30 max. (to install the device on the machine you will need to purchase a finger-holder Z#BPT034 or reinforced toolholder TB#72BE-01)
Device for straightening beams for Digibend 800, H=200 mm, width – 1200 mm, complete with punch (to set the machine must purchase fingers Z#BPT033 and Z#BPT034)
Template for bending R=3ø (ø3/8” – 17,2 mm, ø1/2” – 21,3 mm, ø3/4” – 26,9 mm, ø1” – 33,7 mm, ø1 1/4” – 42,4 mm, ø1 1/2” – 48,3 mm, ø2” – 60,3 mm)
The device for bending of bars and tubes with 4 jaws, max. diameter – ø60 mm, max. bending angle - 180°, finger for fixing templates included
The template for the rotary bending device (ø3/8” – 17,2 mm – R53,5 mm, ø1/2” – 21,3 mm – R59 mm, ø3/4” – 26,9 mm – R78 mm, ø1” – 33,7 mm – R100 mm, ø1 1/4” – 42,4 mm – R157 mm)
Set to prevent bending punch for Digibend 800, l=1080 mm, suitable for all punches finger height H=220mm
Strengthened (mounted on the ear 2 fingers) holder for interchangeable punches with 3 punches (R3,R6,R10) – only 800 Digibend
Fixed onto the hydraulic cylinder holder interchangeable punch complete with interchangeable punch R3
Set for bending strips of width 400 mm: Finger-holder for interchangeable punches H = 400 mm; interchangeable punch, H = 400 mm, R3; matrix holder, H=380 mm