Robur International
full
catalog
catalogs
for download
+7 (495) 989-17-95
Proezd Dezhneva 1, Moscow, 127642, Russia

Hydraulic press brakes
ADIRA PM Guimadira

Product rating
4
/5
Precision and repeatability
3
/5
Technological flexibility
3
/5
Level of automation
3
/5
Level of technical solutions
5
/5
Price (Budget)
Send a request
We will send you our commercial offer
Description

ADIRA is offering innovative, customized and cost-effective solutions for cutting and bending sheet metal.

All ADIRA machine series are put together in Portu, West Portugal, and are made using only the best components of European origin.

The commitment of ADIRA to innovation and continuous improvement is a permanent challenge of all its departments, products and activities. Our Engineering Department is closely linked to Universities and Development Institutes (University of Porto, MIT, INEGI, INESC) in a network of knowledge transfer, taking advantage of the most advanced developments. Also Safety, Ergonomics, Efficiency, Design are permanently on our requirements list for all our machines. For all those reasons we are proud to have a new subtitle in our logo: "Innovation Works".

General features of hydraulic press brakes from ADIRA Series PM Guimadira:​

  • The optimal combination of price and performance.
  • Plenty of options for automation and modification of the machine to the needs of the customer.
  • Because of the innovative design of the frame, there’s no need to rearrange settings because of equipment wearout as it provides the necessary accuracy throughout the entire machine life.
Design features
Components and options
Specifications

Frame

The frame of electric press brakes from ADIRA PM series is a whole normalized welded structure. Each frame is reinforced with additional reinforcement ribs and thick sections in critical areas. The special surface treatment technology eliminates corrosion even after ten years of service.
Furthermore, the PM machines use the innovative HEXA-C technology.

Technology Hexa-C 

ADIRA presents a new concept of the C-shaped frame called HEXA-C (patent pending). The new technology provides constant perfect positioning of the traverse relative to the lower beam regardless of the load, because deformations that occur during bending are not transmitted to the guides of the traverse.

Advantages of this technology:

  • Increased accuracy of bending as traverse is not displaced sideways relatively to the lower beam.
  • The machine shows high resistance to curling in cases when the bending does not occur in the middle of the machine.
  • Eliminated need for additional devices to read the deformation of the frame, which reduces the likelihood of breakdowns and reduces the cost of the machine.
  • The throat in the mouth of the frame is still there, which in many cases eases tool installation, bending of boxes and taking out the bent parts.

Powerful backgauge

The backgauge with a CNC controlled X axis is driven by a brushless servo motor equipped with overload protection and precision ballscrews. Both fingers can be manually adjusted in height and along the instrument.

The Adcontrol 10 CNC

Full control of the machine via CNC Adcontrol 10 2D:

  • Convenient programming of parts with graphic visualization;
  • Automatic bending process optimization tool;
  • Automatic calculation of the required bending force;
  • The angle of bending programmed with resolution of 0.001 degree;
  • Bending tool library;
  • The option to implement chosen parameters of correction to all programs.

Hydraulic system

PM press brakes have a traditional for a vertical press hydraulic system: a hydraulic unit and two hydraulic cylinders. The parallelism of the traverse during lifting and lowering, as well as the correct positioning of the traverse is achieved by two controllable servo valves (axes Y1 and Y2). The position of the upper beam is determined by two linear encoders arranged on the frame. Synchronization of the traverse driving cylinders, the accuracy and repeatability of its stop position are guaranteed by effective communication between all electrical and hydraulic components.

Key features:

  • Traverse positioning accuracy does not exceed ± 0.01 mm.
  • Components from established European manufacturers - Rexroth, Hoerbiger.
  • Gear pump of the hydraulic unit with internal gearing ensures quiet and smooth operation of the unit.
  • Long hydraulic cylinders with superfinished working surfaces.

Базовая комплектация

  • Система ЧПУ Adcontrol 10 с графическим 2D программированием и оптимизатором последовательности гибов: 7” TFТ-дисплей, USB и LAN порты для обмена информацией с внешними устройствами, 2 порта RS232.
  • Программный пакет для 2-ух мерного программирования на стойке Adcontrol 10.
  • Программное обеспечение для оптимизации последовательности гибки.
  • Станина HEXA-C.
  • Задний упор с осью X.
  • 2 пальца заднего упора с ручной регулировкой по высоте и вдоль инструмента.
  • Ручные стандартные зажимы, с системой быстрого зажима инструмента.
  • 2 передних суппорта длиной 500 мм.
  • Педаль управления.
  • Фотоэлектрическая система безопасности для оператора.
  • Фотоэлектрическая защита задней зоны с микровыключателями.
  • Боковые барьеры с микровыключателями.
  • Первая заправка гидравлическим маслом.
  • Набор инструментов для обслуживания.
  • Инструкция по эксплуатации пресса.
  • Без гибочного инструмента.
Cybelec 880 вместо AdControl 10
Delem DA-56S вместо AdControl 10

Ось R

Моторизированное выставление пальцев заднего упора по высоте.

Оси Z1/Z2

Моторизированное выставление пальцев вдоль инструмента.

2 передних суппорта со щётками

Автоматическая система бомбирования Wila

Управляемый ЧПУ электромеханический стол.

Тип Wila, с ручным зажимом
 
Specifications Adira PM 13530 Adira PM 13540 Adira PM 16030 Adira PM 16040 Adira PM 22040
Maximal bending pressure (blankholder), kN 1350 1350 1600 1600 2200
Working length, mm 3000 4000 3000 4000 4000
Distance between racks, mm 2250 3150 2550 3150 3150
Throat, mm 400 400 400 400 400
Traverse descending speed, mm/s 150 150 150 150 150
Bending speed, mm/s 10 10 10 10 8
Reverse speed, mm/s 100 100 100 100 85
General drive power, kW 15 15 15 15 15
X travel (standard support), mm 625 625 625 625 625
X speed (standard support), mm/s 350 350 350 350 350
R travel (standard support), mm 150 150 150 150 150
R speed (standard support), mm/s 50 50 50 50 50
Approximate machine mass, kg 7500 10900 7700 11100 12250
Length, mm 4320(PLS)/4060(NCE) 4920(PLS)/4660(NCE) 4320(PLS)/4060(NCE) 4920(PLS)/4660(NCE) 4940(PLS)/4680(NCE)
Width, mm 1975(PLS)/1645(NCE) 1975(PLS)/1710(NCE) 1975(PLS)/1645(NCE) 1975(PLS)/1710(NCE) 2130(PLS)/1835(NCE)
Height, mm 2955 3110 2955 3110 3110
 
Design features

Frame

The frame of electric press brakes from ADIRA PM series is a whole normalized welded structure. Each frame is reinforced with additional reinforcement ribs and thick sections in critical areas. The special surface treatment technology eliminates corrosion even after ten years of service.
Furthermore, the PM machines use the innovative HEXA-C technology.

Technology Hexa-C 

ADIRA presents a new concept of the C-shaped frame called HEXA-C (patent pending). The new technology provides constant perfect positioning of the traverse relative to the lower beam regardless of the load, because deformations that occur during bending are not transmitted to the guides of the traverse.

Advantages of this technology:

  • Increased accuracy of bending as traverse is not displaced sideways relatively to the lower beam.
  • The machine shows high resistance to curling in cases when the bending does not occur in the middle of the machine.
  • Eliminated need for additional devices to read the deformation of the frame, which reduces the likelihood of breakdowns and reduces the cost of the machine.
  • The throat in the mouth of the frame is still there, which in many cases eases tool installation, bending of boxes and taking out the bent parts.

Powerful backgauge

The backgauge with a CNC controlled X axis is driven by a brushless servo motor equipped with overload protection and precision ballscrews. Both fingers can be manually adjusted in height and along the instrument.

The Adcontrol 10 CNC

Full control of the machine via CNC Adcontrol 10 2D:

  • Convenient programming of parts with graphic visualization;
  • Automatic bending process optimization tool;
  • Automatic calculation of the required bending force;
  • The angle of bending programmed with resolution of 0.001 degree;
  • Bending tool library;
  • The option to implement chosen parameters of correction to all programs.

Hydraulic system

PM press brakes have a traditional for a vertical press hydraulic system: a hydraulic unit and two hydraulic cylinders. The parallelism of the traverse during lifting and lowering, as well as the correct positioning of the traverse is achieved by two controllable servo valves (axes Y1 and Y2). The position of the upper beam is determined by two linear encoders arranged on the frame. Synchronization of the traverse driving cylinders, the accuracy and repeatability of its stop position are guaranteed by effective communication between all electrical and hydraulic components.

Key features:

  • Traverse positioning accuracy does not exceed ± 0.01 mm.
  • Components from established European manufacturers - Rexroth, Hoerbiger.
  • Gear pump of the hydraulic unit with internal gearing ensures quiet and smooth operation of the unit.
  • Long hydraulic cylinders with superfinished working surfaces.
Show more 3
Components and options

Базовая комплектация

  • Система ЧПУ Adcontrol 10 с графическим 2D программированием и оптимизатором последовательности гибов: 7” TFТ-дисплей, USB и LAN порты для обмена информацией с внешними устройствами, 2 порта RS232.
  • Программный пакет для 2-ух мерного программирования на стойке Adcontrol 10.
  • Программное обеспечение для оптимизации последовательности гибки.
  • Станина HEXA-C.
  • Задний упор с осью X.
  • 2 пальца заднего упора с ручной регулировкой по высоте и вдоль инструмента.
  • Ручные стандартные зажимы, с системой быстрого зажима инструмента.
  • 2 передних суппорта длиной 500 мм.
  • Педаль управления.
  • Фотоэлектрическая система безопасности для оператора.
  • Фотоэлектрическая защита задней зоны с микровыключателями.
  • Боковые барьеры с микровыключателями.
  • Первая заправка гидравлическим маслом.
  • Набор инструментов для обслуживания.
  • Инструкция по эксплуатации пресса.
  • Без гибочного инструмента.
Cybelec 880 вместо AdControl 10
Delem DA-56S вместо AdControl 10

Ось R

Моторизированное выставление пальцев заднего упора по высоте.

Оси Z1/Z2

Моторизированное выставление пальцев вдоль инструмента.

2 передних суппорта со щётками

Автоматическая система бомбирования Wila

Управляемый ЧПУ электромеханический стол.

Тип Wila, с ручным зажимом
Show more 6
Specifications
Information available
in full version
Lineup
Adira PM 13530
1350 Maximal bending pressure (blankholder), kN
3000 Working length, mm
400 Throat, mm
Adira PM 13540
1350 Maximal bending pressure (blankholder), kN
4000 Working length, mm
400 Throat, mm
Adira PM 16030
1600 Maximal bending pressure (blankholder), kN
3000 Working length, mm
400 Throat, mm
Adira PM 16040
1600 Maximal bending pressure (blankholder), kN
4000 Working length, mm
400 Throat, mm
Adira PM 22040
2200 Maximal bending pressure (blankholder), kN
4000 Working length, mm
400 Throat, mm
Lineup (5)
Articles
Как выбрать гибочный пресс
Какой метод гибки выбрать и как подобрать соответствующий гибочный пресс?
Supplier

Based on continuous feedback from its customers, Adira is delivering innovative, customized and cost-effective solutions for sustainable metal sheet cutting and forming, along all stages and needs of our customers, offering standards of competitiveness at global level.

Articles
Как выбрать гибочный пресс
Какой метод гибки выбрать и как подобрать соответствующий гибочный пресс?
Have any questions?
Ask the manager

Заполняя данную форму вы принимаете условия Соглашения об использовании сайта, в том числе в части обработки и использования персональных данных.

scroll arrrow