Robur International

Hydraulic press brakes Adira PA 16030

Send a request
We will send you our commercial offer
Maximal bending pressure (blankholder), kN 1600
Working length, mm 3000
Distance between racks, mm 2550
Throat, mm 400
Traverse descending speed, mm/s 150
Bending speed, mm/s 10
Reverse speed, mm/s 150
General drive power, kW 15
X travel (standard support), mm 625
X speed (standard support), mm/s 800
R travel (standard support), mm 200
R speed (standard support), mm/s 200
Approximate machine mass, kg 7900
Length, mm 3760
Width, mm 1840
Height, mm 2910
Design features


The whole normalized welded frame of hydraulic press brakes from ADIRA PA series is made using the HEXA-C technology. The latest solutions used in the design of the rigid frame of the machine bed have made it possible to achieve high productivity and accuracy in the performance of bends.

Technology Hexa-C 

ADIRA presents a new concept of the C-shaped frame called HEXA-C (patent pending). The new technology provides constant perfect positioning of the traverse relative to the lower beam regardless of the load, because deformations that occur during bending are not transmitted to the guides of the traverse.

Advantages of this technology:

  • Increased accuracy of bending as traverse is not displaced sideways relatively to the lower beam.
  • The machine shows high resistance to curling in cases when the bending does not occur in the middle of the machine.
  • Eliminated need for additional devices to read the deformation of the frame, which reduces the likelihood of breakdowns and reduces the cost of the machine.
  • The throat in the mouth of the frame is still there, which in many cases eases tool installation, bending of boxes and taking out the bent parts.


The backgauge with a CNC controlled X axis is driven by a brushless servo motor equipped with overload protection and precision ballscrews. Both fingers can be manually adjusted in height and along the instrument.

Big throat and distance between the traverse and the tabletop

A convenient feature that allows the press brake making of large boxes.

Manual tool holder clamps

Standard features include manual tool holder clamps with a fast clamping system.

Full control of the machine via the Adcontrol 50 CNC
  • Convenient programming of parts with graphical visualization.
  • Large touchscreen display.
  • The angle of bending programmed with resolution of 0.01 degree.
  • A simple adjustment of the bottom stop of the traverse during the bending process (resolution of 0.01 mm).
  • Automatic CNC calculation of the required bending force.
  • Automatic calculation of the optimal bending sequence.
  • The option to implement chosen parameters of correction to all programs.
  • Bending tool library.
  • Network map for communication with the press brake on a local network.
  • Russian language interface of the console.

Hydraulic system

Key features:

  • A compact hydraulic unit.
  • Long hydraulic cylinders with superfinished working surfaces.


Engine speed control system

The PA press brakes use a hydro engine control system. When the press bake is not processing a blank (during the changeover, programming or part rearrangement), the CNC sends a signal to the inverter and the engine speed is reduced. Thus there can be achieved significant energy savings and reduced the noise caused by the operation of the machine.

Components and options

Базовая комплектация

  • Cтанина HEXA-C.
  • Система ЧПУ Adcontrol50, поддерживает до 6 управляемых осей (Y1/Y2, X, R, Z1/Z2), с сенсорным дисплеем, USB и LAN порт для обмена информацией с внешними устройствами, 2 порта RS232;
  • Задний упор с осями X и R. 
  • 2 пальца заднего упора с ручной регулировкой вдоль инструмента.
  • Крепления инструмента с системой быстрого зажима и реверса инструмента.
  • 2 передних суппорта.
  • Фотоэлектрическая система безопасности для оператора.
  • Стол, ширина – 60 мм.
  • Педаль управления.
  • Фотоэлектрическая защита задней зоны с микровыключателями.
  • Боковые барьеры с микровыключателями.
  • Первая заправка гидравлическим маслом.
  • Набор инструментов для обслуживания.
  • Инструкция по эксплуатации пресса.
Cybelec Modeva 15S 3D, вместо AdControl 50
Delem DA66T, вместо AdControl 50
Автоматическая система бомбирования Wila
Ось X1 (Xrel)
Оси Z1/Z2

2 передних суппорта с щётками

Сопроводители листа
Лазерная система измерения угла, только с AdControl 50
Send a request
We will send you our commercial offer
scroll arrrow