Electric press brakes Adira ВВ-5020
|Maximal bending pressure (blankholder), kN||500|
|Working length, mm||2100|
|Distance between racks, mm||1550|
|Maximal traverse travel, mm||260|
|Traverse descending speed, mm/s||140|
|Bending speed, mm/s||10|
|Reverse speed, mm/s||160|
|General drive power, kW||2х7,5|
|X travel (standard support), mm||625|
|X speed (standard support), mm/s||350|
|R travel (standard support), mm||150|
|R speed (standard support), mm/s||50|
|Approximate machine mass, kg||5000|
Adira electromechanical press brakes have low power consumption since the motor only works during movement of the traverse (total power consumption is 35% less than that of an identical hydraulic press). Such a proportional consumption is particularly advantageous in the case of individual production which is characterized by frequent changeovers and the operator may be long thinking about the correct blank position before the blank is bent.
The backgauge with a CNC controlled X axis is driven by a brushless servo motor equipped with overload protection and precision ballscrews. Both fingers can be manually adjusted in height and along the instrument.
The Adcontrol 10 CNC
Full control of the machine via CNC Adcontrol 10 2D:
- Convenient programming of parts with graphic visualization;
- Automatic bending process optimization tool;
- Automatic calculation of the required bending force;
- The angle of bending programmed with resolution of 0.001 degree;
- Bending tool library;
- The option to implement chosen parameters of correction to all programs.