Horizontal grinding machines 2500/1100
|Approximate machine weight, kg||14500|
|Maximal working length, mm||2500|
|Maximal roll width, mm||1100|
|Table length, mm||2500|
|Table width, mm||800|
|Maximal power consumption, kW||2800|
|Operating speed range (X-axis stepless regulation), m/mm||0 ÷ 40|
|Permissible load on table, kg||5000|
|Hydraulic pump motor power, kW||18,5|
|Operating speed range (Y-axis stepless regulation), m/mm||0 ÷ 5|
|Minimal programmed increment (Z axis), mm||0,001|
|Spindle speed (at 50 Hz), rpm||1450|
|Operating speed range (Z-axis stepless regulation), m/mm||0 ÷ 2|
|Minimal programmed increment (Y axis), mm||0,001|
Hydrostatics and hydrodynamics
All guiding elements are hydrostatic and their surfaces are perfectly polished. Hydrostatic guide lubrication works based on a closed loop system supplying lubricant under pressure (on the column, the table and the headstock), which ensures that ultra-thin oil film lies between the contacting surfaces of all guiding elements. The absence of direct contact with metal surfaces ensures reliability, excludes wear-out, and as a consequence the original geometric accuracy of the machine is maintained for the entire service life. Minimum friction when sliding – it means to use the full capacity of the machine, high accuracy, no stick-slip at the feed or striction effect, and ensuring smooth positioning, high precision, high surface treatment quality, and high load-bearing capacity.
Three automation levels: NC DIASTEP
NC DIASTEP is designed to facilitate the basic operations of grinding and controls.
Three automation levels: NC COMPACT PLUS
NC COMPACT PLUS with advanced profiling functions can store up to 50 different programs.