Robur International

5-axis milling and machining centers with up-to-the-minute CNC conversational mode SX-60

Send a request
We will send you our commercial offer
X-axis movement, mm 1524
Y-axis movement, mm 762
Z-axis movement, mm 914
Axis movement (a), degrees +/- 360°
Axis movement (c), degrees +/- 90°
Permissible load on table at even weight distribution, kg 2041
Table dimensions 609 x 1701
Number of T-shaped slots, mm 5 / 18
Table height from the floor, mm 813
Motor power (at peak), kW 15
Spindle speed, rpm 15000
Spindle torque, Nm 150 при 500 об/мин
Tool type HSK-63A
Distance from spindle center to column, mm 736
Distance from spindle nose to tabletop, mm 1168 - 254
Distance from spindle center to center of B-axis, mm 355
Number of tool positions, pos. 24
Tool changeover time, sec 20
Maximal sheet dimensions (X x Y coordinates), mm x mm 76
Maximal workpiece weight with support, kg 5
Maximal bending length, mm 305
X, Y, Z positioning precision, mm +/-0,005
X, Y, Z repeatability, mm +/-0,0025
A, C positioning precision, mm 15 (5)
A, C repeatability, sec. 5 (2)
Rapid traverse, m/min 30 - X, Y ось; 23 - Z ось
Rapid rotation, rpm 22 (44)
Work feeding speed, mm/min 0,0254 - 22860
Servocontroller type AC цифровой бесщеточный
Pressure on axis (at peak), kN 22 - X, Y ось; 28 - Z ось
Air connection 6,2 бар 142 л/мин
Coolant tank, l 340
Coolant flow, l/min 34
Connection requirements 80A / 380-430 В Переменный ток 3-фазы
Transportation mode dimensions, mm 4090 x 2261 x 2363
Operating mode dimensions, mm 4090 x 2845 x 2845
Machine weight, kg 8845
Design features

The cast frame

The high rigidity of the machine is achieved through a cast 45° inclined frame made of the patented material MEEHANITE strength of which is 2 times superior to gray iron.

CNC system with conversational mode

The touch control system is developed on the basis of the powerful and flexible Siemens platform. It is designed for maximum performance and provides everything necessary for fast and efficient production:

  • Conversational mode for simple programming.
  • A full set of production cycle programming software.
  • Hot keys and resource control.
  • G-code programming and editing that is compatible with Fanuc, Siemens and Haas G-codes.
  • Automatic calculation of dimensions missing from the drawing.
  • Real-time visualization available while programming.
  • Modeling of 3D solids.

Smooth movement and rapid traverse

Movements are smooth and rapid traverse can increase up to 30 m/min; extra endurance is provided by sliding boxways that feature special Turcite B anti-friction way and gib liners.

24 tool ATC

Weiss rotary headstock 

High-tech brushless electric motors

  • Brushless alternating current servomotors
  • Rare-earth magnets provide higher torque.
  • DriveClic high-resolution sensors.
  • Totally sensor controlled – no access to reference positions needed.
  • High-tech cables from Siemens.

Systematic testing of mechanics

  • Test run time – 100 hours
  • Measurements and temperature changes are recorded also during the night-time work
  • More than 89 different inspections for mechanics
  • Precision granite surface plates and indicators are calibrated annually
  • Full cooling system check
  • Each bolt is tightened to its specification and marked
  • Customary process upgrades

Full electronic quality control of each machine

  • Laser calibration of all 3 axes by Renishaw.
  • Renishaw Ballbar system tests.
  • Electronic balancing of all rotating components.

Precision and performance quality control

  • A sample part Circle Diamond Square cutting test.
  • Exact sample part measurements made after the test.
  • Full test report given after checking the sample part.

International quality certificate delivered with every machine

  • Laser calibration report
  • Ballbar test calibration report
  • Circle Diamond Square Test sample
  • Quality certificate assigned by Manufacturer, Chief Inspector, and Electric Engineer
Send a request
We will send you our commercial offer
scroll arrrow