about Robur International
In the name of the company LLC RedPrivod I express tanks to the company LLC Robur International for their productive and qualitative work at our site, their insightful approach to requirements of the client, and their sophisticated technical solutions to accomplish our not so simple tasks.
Read about turning and milling equipment implementation examples in LLC RedPrivod case.
I express my sincere gratitude for the skillful and professional actions of your employees who in a fairly short period of time made the repair of vertical bending press showing at the same time creative thinking, unconventional approach to solving problems, and high level of professionalism.
We thank the staff members of Robur Mechanics service department for productive cooperation performing the maintenance and repair works of coordinate punching machines from the Italian company Euromac. It is nice to feel that the employees of your company are responsive and technologically competent about their work during the whole period of our cooperation. We hope that our collaboration will successfully continue in the future as well. We wish new accomplishments and financial welfare to your company!
We express our sincere thanks and deep appreciation to the staff member at your department. In the evening, breakages of two disk cutters on the roll forming line occurred, which was accompanied by the alarm signal No 42. We called a staff member of your company to receive recommendations on how to eliminate these failures. Consultations lasted from 20.00 to 22.00 Moscow time. As a result of his competent advice, we were able to solve the problem on our own.
The unitary enterprise ARLEKS thanks for providing timely deliveries and professional commissioning of semi-automatic spot welding machines, model MPS-SM-10-PD-ST1, produced by CEMSA enterprise (Italy). During the commissioning work, there was established contact with the staff of our company, carried out operator training, explained in detail and demonstrated the main points of settings and adjustments of the welding unit.
MEDIN Medical Equipment Production enterprise thanks the Robur company for providing timely delivery and professional commissioning services for the installment of resistance spot welding machine, column type model SIGMA NS 400–90 MF, manufactured by CEMSA (Italy).
Works are carried out very quickly. We made our request during the day and the engineer arrived next morning. We are also very satisfied about the overall quality of the performed works. At the site, the engineer discovered the cause of failure and fixed it quickly. There is also long-distance support. We are interested to sign a maintenance contract to carry out emergency repair. Machines cannot be idle for long.
We express our gratitude and appreciation for the qualitative and timely equipment delivery service. Our operators have completed their independent work under supervision of the Robur International service engineer and the quality control of accomplished works has been carried out. We express our confidence in longevity of the established collaboration and look forward to further mutually beneficial and prolific partnership.
Our company works with LLC Robur Ukraina since the year 2012. As a result of this collaboration, in the year 2013 we acquired a hydraulic coordinate punch press with CNC, model МТХ FLEX 6 1250/30–2500, manufactured by Euromac (Italy) and a punching tool manufactured by PassStanzetechnik (Germany). The equipment was delivered on time and nothing was missing from the set.
All emerging issues about maintenance works and operation of equipment in service have been resolved quickly, affordably and qualitatively in collaboration with LLC Robur Ukraina service engineers. In the year 2014 we acquired and additional tool set from the PassStanzetechnik company (Germany).
In the year 2014, we also purchased a cutting machine with upwards blade TEKNA TK 101 A. The machine was delivered on time, commissioning and personnel training was carried out qualitatively. We are satisfied with how the equipment works installed by LLC Robur Ukraina.
Production capacity of JSC Holding Management Company Bobruiskagromash includes: hydraulic coordinate punch press МТХ Flex 6 1250/30-2500 with CNC that is manufactured by the Italian company EUROMAC. The machine has been efficiently used in our industry for punching sheet metal workpiece where it performs the widest variety of tasks. To name the advantages of this type of equipment, we can include the following:
- A well-thought high endurance cast metal machine frame design that takes into account the specifics of product manufacturing technology and provides access to the machine from 3 sides,
- Opportunity to work with multi-instrumental turret heads type Multi Tool, which allows changing the range of manufactured products easily,
- Flex system that programs the speed of the puncheon movement,
- Intuitively accessible interface for controls,
- Low energy consumption.
In general, we want to emphasize the high quality of the machine, which over the entire period of operation has proved to be the best.
In order to create the equivalent of imported goods and, consequently, import substitution production, our company has bought automatic pipe and tube bender manufactured by MACRI (Italy) and equipment for the production of milk cooler bottoms, BOLDRINI manufactured by LUCAS (Italy).
The purchase of this equipment that was supplied by JLLC Robur Engineering Center helped to increase productivity, improve quality of products, and reduce the costs significantly.
Currently these machines are producing competitive marketable products for the Belarusian market and for export, namely the technical equipment for agricultural purposes to equip farms. Thus we find the use of these proven and undoubtedly effective technologies appropriate because they can significantly increase the exportable part of production.
We are using the guillotine shears supplied by your company for more over a year. Your company was chosen because of the minimum delivery times, competitive equipment pricing, and availability of components and spare parts. We are satisfied with the operation of this equipment as the process of making equipment regulations and adjustments has accelerated, we have now better quality of the cut, reduced noise and significantly improved performance. We notice that all contractual obligations of your company have been met timely and qualitatively and wish you further development and reliable partners.
We thank the company Robur Engineering Center for supplying us with the hydraulic coordinate punch press, model BX 1000 / 30-1250 (EUROMAC - Italy), and the prompt technical support. The machine provides high accuracy and productivity of work. A distinctive feature is the low power consumption. We recommend the collaboration with JLLC Robur Engineering Center as this company has proved itself as a reliable partner and the supplier of high-tech equipment.
We thank the JLLC Robur Engineering Center for their timely and qualitative delivery of following equipment units:
- Hydraulic coordinate punching machine, model MTX Flex 6 1250 / 30-2500 produced by EUROMAC Spa (Italy).
- Hydraulic notching machine with automatic clearance settings between cutting blades VA-MULTI 220/6R, produced by EUROMAC Spa (Italy).
- Synchronized hydraulic bending machine VIMERCATI PHSY (Italy).
- Hydraulic guillotine shears VimercatiCostCutter 306 (Italy).
Tamirastroi ODO has long deserved credibility as a company that uses a wide range of high-tech equipment, which has allowed it producing goods that meet the European level standards. The acquisition of the abovementioned modern high-tech equipment from leading European manufacturers - this is undoubtedly another step to success.
Our company is expressing confidence in the further mutually beneficial and productive collaboration.
In the year 2013, our company acquired a coordinate punch press Euromac MTX FLEX 12 1250/30–2500, manufactured in Italy. This equipment is a top level machine that combines all contemporary technologies, high speed and very high production flexibility. Conveniently, each tool has settings for punching speed from 10 to 2000 strokes per min, acceleration, and stop/pause during the stroke at any height of the puncheon with precision of 0.05 mm. It gives excellent results when in operation, as well as it improves the quality of piercing when working with any kind of material (thin, thick, durable). One could argue that the Euromac press is a reliable machine capable of performing all the functions of contemporary production with minimal operating costs and for a very competitive price.
We hope for further productive cooperation between our companies and we wish new achievements and financial well-being to our partners!
Our company has acquired the following equipment: guillotine Vimercati – November, yr 2013; synchronized hydraulic press brake Vimercati – April, yr 2012.
The decision to collaborate with GOC Robur International was made taking in view their professionalism, efficiency, and competence and the comfortable working conditions. We are satisfied with the operation of the equipment supplied and we recommend it to all our partners. We wish you good luck, sustainable growth, development and prosperity! It’s our pleasure to have partners like you!
I’m bringing to your knowledge information that, during the year 2014, the employees of our company, working together with experts of your enterprise have performed the compulsory activities to negotiate, purchase and commission the coordinate punch press EuromacMTXFlex 6.
I have to note that the abovementioned machine was chosen from a reasonably extended list of industrial equipment offered by dealer companies of other manufacturers. However, the decision regarding the acquisition of the press was made in favor to your company.
Delivery of the equipment was carried out exactly on time and commissioning works were performed at a high professional level.
We are very pleased that we have been able to find in your company a good partner that is capable of not only supplying equipment and tools but also able to provide comprehensive advice and technical support to the delivered products.
At the moment, our specialists are working on negotiations about possibilities to implement improvements to RoburCAM numeric control program with a view to full compliance with our requirements in terms of working with a specific tool.
I am sure that our experience of operating the equipment supplied with a specific tool will be extremely useful for professionals of your company and it will significantly expand the range of potential capabilities using coordinate punch presses from Euromac.
LLC "Profit" would like to thank for:
- Prompt delivery of equipment, namely the turning machine center Fryer SL-8 with CNC,
- Timely conducted commissioning with operator training on how to program with Siemens 840 SL console and operation of the machine,
- Maintaining the business partnership for the period of time the unit is in service.
During operation, this equipment has proved itself as a high-performance and easy to use machine. Advantages of Fryer SL-8 are the wholesome cast metal slant bed that ensures high rigidity of the construction together with the broad sliding guides. All together, with the powerful 26 kW high-torque motor, it can significantly reduce the processing time and increase accuracy.
The comprehensive interactive programming system Siemens Touch 2100 allows making programs easily and quickly – all thanks to the interactive operation mode, touchscreen display, and competently translated Russian language interface. We express our confidence in longevity of the existing relationship and look forward to further mutually beneficial cooperation with Robur International.
Work quality can be estimated as high. The engineer discovered the cause of failure and fixed it quickly when at the site. There is also long-distance support available.
No complains about arrival times or deadlines: it is really prompt. We made our request during the day and the engineer was already at the site next morning. We are interested to sign a maintenance contract for emergency repair works. Machines cannot be idle for long.
We enjoy our work with Robur International!